Habasit PM-1056/160 Скачать руководство пользователя страница 11

Страница: 11 / 82

Habasit Italiana S.p.A.

Vittorio Veneto 31029 (TV)

Tel.: ++39(0)438.9113

Fax. ++39(0)438.200545

Use Manual

Hot Press PM-1056/160

Author:

A.T.

REGULATIONS AND GENERAL WARNING NOTES

Edition:

09/2004

Page

A-3

Replaces:

Hot Press type PM-1056/160

SECTION A.2

HOW THE MANUAL IS ORGANIZED

This machine was designed, built and tested by expert technicians. The high quality

materials used to build the machine make it operationally highly reliable.

For further, more detailed information or in regard to problems, please contact our

headquarters at the following address:

Habasit Italiana S.p.A.
Via A. Meucci 8
Zona Industriale
I - 31029 Vittorio Veneto
Tel.: 0039.(0)438.9113
Fax: 0039.(0)438.200545

This manual observes the organizational rules and requirements of Directive 98/37/CE, duly

amended, being the Directive of the Council of the European Community of 14 June 1989,

concerning the reconciliation of the laws of member states regarding machines, also known

as the «Machine Directive», and also all the other Directives and Regulations referred to in

the said Machine Directive, inspired by criteria which, in addition to illustrating the technical

characteristics of the machine and its use, maintenance and troubleshooting methods, also

clearly indicate the following:

All the protection measures adopted on the machine, fully integrating design safety planning

and construction safety

All protection measures to be adopted to meet those risks that cannot be completely

eliminated

All indications for the training of personnel using the machine, while indicating where it is

necessary to provide for individual safety protection devices.

The manual is divided up into sections. Each section deals with a specific subject in which

every aspect of safety is considered and clearly highlighted in the text.

Содержание PM-1056/160



















































































Результаты поиска

Содержание PM-1056/160

Отзывы:

Похожие инструкции для PM-1056/160

Бренды по названию

Популярные бренды

Habasit PM-1056/160, Общее руководство по использованию и техническому обслуживанию

Результаты поиска

Содержание PM-1056/160

Отзывы:

Похожие инструкции для PM-1056/160

Бренды по названию

Популярные бренды