Habasit PM-1056/160, Общее руководство по использованию и техническому обслуживанию

Страница: 37 / 82

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Use Manual
Hot Press PM-1056/160
Author: A.T.
INSTALLATION
Edition: 09/2004
Page
C-6
Replaces:
Hot Press type PM-1056/160
Make the necessary water and air connections between the water supply and the control unit
PMC-XX
Ensure the water connections are well sealed and that any leaks that could occur do not
come into contact with electrical parts
Mobile operation
Running the system in its mobile operation requires the use of suitable instruments (such as
a portable compressor for the air supply and a water tank with immersion pump or available
running water).
Ensure that the whole system is not supplied by electrical, air and water sources
Ensure all the plant preceding the equipment corresponds with its own specifications
Using the pneumatic connection kit (code 008E1000), connect the presser cushions of the
upper and lower sides.
Ensure the water connections are well sealed and that any leaks that could occur do not
come into contact with electrical parts
Section. C.3.3 E
LECTRICAL CONNECTION
ATTENTION
Ensure that the whole system is not supplied by electrical, air and water sources
Ensure all the plant preceding the equipment corresponds with its own specifications
The electrical power parts (and water and air supply logic systems) are managed by the
regulating unit
PMR-XX
. Referring to Section. B.4.3 Regulating unit options ensure the
regulating unit is suitable for the press actually in use.
Connect the press's connectors to the regulating unit
PMR-XX
If present carry out the necessary connections between the regulating unit
PMR-XX
and the
control unit
PMC-XX
.
Connect the regulating unit
PMR-XX
to the mains electrical supply (see manual
PMR-XX
)
NOTE
The use of the regulating unit is necessary both for fixed operation and for mobile operation.