19
loopback-detection interval-time
Syntax
loopback-detection interval-time
time
undo loopback-detection interval-time
View
System view
Default level
2: System level
Parameters
time
: Sets the loopback detection interval, ranging from 5 to 300 seconds.
Description
Use
loopback-detection interval-time
to set the loopback detection interval.
Use
undo loopback-detection interval-time
to restore the default loopback detection interval.
The default loopback detection interval is 30 seconds.
Related commands:
display loopback-detection
.
Examples
# Set the loopback detection interval to 10 seconds.
<Sysname> system-view
[Sysname] loopback-detection interval-time 10
multicast-suppression
Syntax
multicast-suppression
{
ratio
|
pps
max-pps
}
undo
multicast-suppression
View
Layer 2 Ethernet interface view
Default level
2: System level
Parameters
ratio
: Sets the multicast suppression threshold as a percentage of the transmission capability of an
Ethernet interface, ranging from 1 to 100. The smaller the percentage, the less multicast traffic is allowed
to pass through.
pps
max-pps
: Specifies the maximum number of multicast packets that the interface can forward per
second. The
max-pps
argument ranges from 1 to 1,488,100 pps.
•
When the
pps
keyword is specified, and a suppression granularity larger than 1 is specified on the
device, the value of the
pps
keyword must be no smaller than and an integral multiple of the
granularity. The multicast suppression threshold value configured through this keyword on an
