H3C UniServer R6900 G3, Руководство пользователя

Страница: 86 / 214

7-5
Figure 7-5 Removing the screws on a main board
b.
Lift the cable clamp and the riser card bracket from the main board, as shown by callouts 1
and 2
Figure 7-6 .
c.
Lift the main board slowly out of the compute module, as shown by callout 3 in Figure 7-6 .
Figure 7-6 Removing the cable clamp, riser card bracket, and main board
Installing a compute module and its main board
1.
Install the main board in the compute module:
a.
Align the installation holes on the main board with the screw holes on the compute module,
as shown by callout 1 in
Figure 7-7 . Then, place the main board slowly in the compute
module.
b.
Put the cable clamp and the riser card bracket onto the main board, as shown by callouts 2
and 3 in
Figure 7-7 . Make sure the installation holes on the cable clamp and the riser card
bracket are aligned with the screw holes on the main board.