H3C UniServer R6900 G3, Руководство пользователя

Страница: 59 / 214

6-25
4.
Install the mLOM Ethernet adapter to the riser card:
a.
Remove the screw from the mLOM Ethernet adapter slot and then remove the blank, as
shown in
Figure 6-31 .
Figure 6-31 Removing the screw
b.
Open the riser card cover. For more information, see " Installing riser cards and PCIe
modules at the server rear ."
c.
Remove the PCIe module in PCIe slot 4 on the riser card, if a PCIe module is installed. For
more information, see "
Replacing a riser card and PCIe module at the server rear ."
Remove the PCIe module blank, if no PCIe module is installed. For more information, see
"
Installing riser cards and PCIe modules at the server rear. "
d.
Insert the mLOM Ethernet adapter into the slot along the guide rails, and fasten the screw to
secure the Ethernet adapter into place, as shown in
Figure 6-32 . Then, close the riser card
cover.