H3C UniServer R4300 G5, Руководство пользователя

Страница: 97 / 167

88
•
Do not wear any conductive objects, such as jewelry or watches.
•
When you replace a component, examine the slot and connector for damages. Make sure the
pins are not damaged (bent for example) and do not contain any foreign objects.
Removing a SATA M.2 SSD and a SATA M.2 SSD expander
module
1. Power off the server. For more information, see " Powering off the server ."
2. Remove the server from the rack. For more information, see " Removing the server from a rack ."
3. Remove the access panel. For more information, see " Removing the access panel ."
4. Remove all fan modules. For more information, see " Removing a fan module ."
5. Remove the fan cage. For more information, see " Removing the fan cage ."
6. Remove the SATA M.2 SSD expander module that holds the SATA M.2 SSD:
a. Disconnect the cable from the SATA M.2 SSD expander module.
b. Remove the expander module. Remove the screws at both ends of the module that secure
the expander module and then pull the expander module out, as shown in
Figure 95 .
Figure 95 Removing the SATA M.2 SSD expander module
7. Remove a SATA M.2 SSD. Slide the locking tab, lift the SSD, and then pull the SSD out of the
slot, as shown in
Figure 96 .
Figure 96 Removing a SATA M.2 SSD