H3C UniServer R4300 G5, Руководство пользователя

Страница: 47 / 167

38
To install a PCIe module blank:
1. Insert the PCIe module blank into the riser card, as shown by callout 1 in Figure 32 .
2. Snap the blank tail to insert the standout on the riser card into the blank notch to secure the
blank, as shown by callout 2 in
Figure 32 .
Figure 32 Installing a PCIe module blank
Removing the blank from the OCP network adapter slot
Hold the handle on the blank, and pull the blank out of the chassis, as shown in Figure 33 .
Figure 33 Removing the blank from the OCP network adapter slot