6
Figure 5 Security bezel
Table 3 Security bezel effect light
System status
Light status
Standby
Steady white: The system is in standby state.
Startup
•
Beads turn on white from middle in turn
—POST progress.
•
Beads turn on white from middle three times
—POST has finished.
Running
•
Breathing white (gradient at 0.2 Hz)
—Normal state, indicating the system
load by the percentage of beads turning on from the middle to the two sides
of the security bezel.
No load
—Less than 10%.
Light load
—10% to 50%.
Middle load
—50% to 80%.
Heavy load
—More than 80%.
•
Breathing white (gradient at 1 Hz )
—A pre-alarm is present.
•
Flashing amber (1 Hz)
—A major alarm is present.
•
Flashing red (1 Hz)
—A critical alarm is present.
UID
•
All beads flash white (1 Hz)
—The firmware is being upgraded or the
system is being managed from HDM. Do not power off the server.
•
Some beads flash white (1 Hz)
—HDM is restarting.
Ports
Table 4 Ports on the front panel
Port
Type
Description
VGA connector
DB-15
Connects a display terminal, such as a monitor or KVM device.
USB connector
USB 3.0
Connects the following devices:
•
USB flash drive.
•
USB keyboard or mouse.
•
USB optical drive for operating system installation.
Dedicated
management
connector
Type-C
Connects a Type-C to USB adapter cable, which connects to a
USB Wi-Fi adapter.
NOTE:
The server supports only Xiaomi USB Wi-Fi adapters.
