1-21
User interface
authentication
mode
User privilege level
switch
authentication
mode
Information input for the
first authentication mode
Information input after the
authentication mode changes
local
scheme
Local user privilege level
switch password
Password for privilege level
switch (configured on the AAA
server). The system uses the
username used for logging in as
the privilege level switch
username.
scheme
Password for privilege level
switch (configured on the
AAA server). The system
uses the username used for
logging in as the privilege
level switch username.
—
scheme
local
Password for privilege level
switch (configured on the
AAA server). The system
uses the username used for
logging in as the privilege
level switch username.
Local user privilege level switch
password
z
When the authentication mode is set to
local
, configure the local password before switching to a
higher user privilege level.
z
When the authentication mode is set to
scheme
, configure AAA related parameters before
switching to a higher user privilege level.
z
The privilege level switch fails after three consecutive unsuccessful password attempts.
z
For more information about user interface authentication, see
Logging In
to the Device
in the
Fundamentals Configuration Guide
.
Modifying the Level of a Command
All the commands in a view are defaulted to different levels. The administrator can change the default
level of a command to a lower level or a higher level as needed.
Follow these steps to modify the command level:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Configure the command level in a
specified view
command-privilege level level
view view
command
Required
for the default
settings.
