8-1
8
MIM Modules
MIM Options
Currently the V100-E supports these types of MIMs:
z
1-port 10Base-T/100Base-TX FE interface module (1FE)
z
2-port 10Base-T/100Base-TX FE interface module (2FE)
z
4-port 10Base-T/100Base-TX FE interface module (4FE)
z
1-port 10Base-T/100Base-TX/1000Base-T Ethernet interface module (1GBE)
z
2-port 10Base-T/100Base-TX/1000Base-T Ethernet interface module (2GBE)
z
1-port 1000Base-LX/1000Base-SX Ethernet interface module (1GEF)
z
2-port 1000Base-LX/1000Base-SX Ethernet interface module (2GEF)
z
High-performance network data encryption module (HNDE)
Installing and Removing an MIM
There is a shield finger on the front panel of the MIM module, which provides electromagnetic shielding
for the V100-E. You need to keep the shield finger intact when replacing the module. Do not remove the
shield finger.
Before installing MIMs, read Installation Preparations carefully.
Tools
ESD-preventive wrist strap
Installing an MIM
Before performing any of the following operations, make sure you have completely powered down the
V100-E to avoid getting electric shocks.
Follow these steps to install an MIM:
Step1
Place the V100-E with its front panel facing you.
Step2
Turn off the site power and remove the power cord.
