About This Manual
Organization
H3C SecPath V100-E Security Gateway Installation Manual
is organized as follows:
Chapter
Contents
1 Product Overview
Introduces the features and applications of the
V100-E and provides the appearance and
system specifications of the V100-E.
2 Installation Preparations
Introduces the environment requirements for
installing the V100-E, installation precautions
and installation tools.
3 Installing the V100-E
Introduces how to install the V100-E and how to
connect the power cable, console cable and
Ethernet cable.
4 Starting and Configuring the V100-E
Introduces the startup and configuration of the
V100-E, including device boot and powering up
and system file initialization.
5 Maintaining Software
Introduces software maintenance of the V100-E,
including software upgrade and configuration file
loading.
6 Maintaining Hardware
Introduces hardware maintenance of the
V100-E, including replacing a DDR SDRAM.
7 Troubleshooting
Introduces the faults that may occur during the
installation and startup of the V100-E and the
corresponding solutions.
8 MIM Modules
Introduces the appearance, panel and LEDs of
the MIMs, and describes how to install the MIMs
and how to connect the interface cables.
Appendix Compliance and Safety Manual
This section introduces part of the safety
precautions that should be followed during the
installation and maintenance of the equipment.
Conventions
The manual uses the following conventions:
Command conventions
Convention
Description
Boldface
The keywords of a command line are in
Boldface
.
italic
Command arguments are in
italic
.
[ ]
Items (keywords or arguments) in square brackets [ ] are optional.
{ x | y | ... }
Alternative items are grouped in braces and separated by vertical bars.
One is selected.
[ x | y | ... ]
Optional alternative items are grouped in square brackets and
separated by vertical bars. One or none is selected.
