6-5
z
Hold the memory module only by its non-conductive edge. Because a memory module is
vulnerable to ESD, improper operation may cause damage to it.
z
Do not use too much force in the operation.
z
Do not touch the surface-mounted components of the memory module directly with your hands.
Install a DDR SDRAM
Follow these steps to install a DDR SDRAM:
Step1
Locate the position to install the DDR SDRAM.
Step2
Hold the memory by its non-conductive edge and insert it into the bank.
Step3
Firmly press the memory and press the latches to lock the DDR SDRAM in position.
Installing the Chassis Cover
Follow these steps to install the chassis cover:
Step1
Place the V100-E on a table with its front panel forwards.
Step2
Hold the chassis cover and align the small tabs on the cover with the edges of the bottom of the chassis.
Step3
Push the cover until the tabs on the cover and the tabs on the top of the front panel are engaged.
Step4
Lower the chassis cover onto the chassis bottom, engaging the tabs on the cover with the tabs on the
top of the side panels.
Figure 6-5 shows how to install the chassis cover.
Figure 6-5
Install the chassis cover
(2)
(2)
(2)
(1)
(1) Push the cover forwards
(2) Fasten six screws at these places
Step5
Fasten the six screws to fix the chassis cover.
Installing and Removing MIMs
