H3C SecPath F100-X-G3, Руководство по установке

Страница: 64 / 71

1
1
Appendix B LEDs
The F100-C-G3, F100-S-G3, F100-M-G3, F100-A-G3, F100-E-G3, F1000-C-G3, F1000-S-G3,
F1000-A-G3, and F1000-E-G3 firewalls use similar LEDs. This section uses the LEDs on the
F1000-E-G3 firewall as an example.
Figure1-1 LEDs
Table1-2 LED descriptions
No. LED Mark Status Description
Ethernet
copper port
status LED
10/100/1000
BASE-T
Off No link is present on the port.
Steady green A link is present on the port.
Flashing green The port is receiving and sending data.
Ethernet
fiber port
status LED
1000BASE-X
Off No link is present on the port.
Steady green A 1000 Mbps link is present on the port.
Flashing green
The port is receiving and sending data at
1000 Mbps.
10GBASE-R
Off No link is present on the port.
Steady green A 10 Gbps link is present on the port.
Flashing green
The port is receiving and sending data at
10 Gbps.
System
status LED
SYS
Off
The firewall has not been powered on or
has failed.
Slow flashing green The firewall is operating correctly.
Fast flashing green The firewall is loading software.
Power
supply
status LED •
PWR0
•
PWR1
Off
One of the following conditions exists:
•
The power supply slot is empty.
•
The power supply is faulty.
Steady green The power supply is operating correctly.
Interface
module
status LED
•
SLOT1
•
SLOT2
•
SLOT3
•
SLOT4
Off
One of the following conditions exists:
•
The interface module slot is empty.
•
The interface module is faulty
Steady green
The interface module is operating
correctly.
3 4
5
1 2
1
2
3
4
5