Repair
Before opening the enclosure and doing anything inside you should remove ac
power from the unit.
The fuse is located on the DIN rail next to the power supply, inside the plastic fuse holder.
Replace with the same size and type.
Fuse Replacement
Other repairs are made by replacing complete circuit board assemblies. This should be done only by an
authorized repair person or under the direction of our technical staff.
Factory Service
Should you require service for your Ratio:Feeder® J+ Advanced controller or injector, the H.E. Anderson
Co. offers several flexible factory service options. Call our number listed in the front of this manual for
complete information. If you need to return any parts for service or replacement, our shipping address is:
H.E. Anderson Company
2100 Anderson Drive
Muskogee, Oklahoma 74403
USA
Please enclose a note detailing the problems and the type of service you need. Include the name of a
contact person, phone number, and the billing name and address. Any return for warranty, or credit, must
have an RMA number. Contact H.E. Anderson for this number before returning.
Specifications
Power Requirements
120 VAC Standard
Enclosure
Gasket sealed plastic enclosure with sealed front panel.
Display
20 character x 4 line LCD
Flow Totalizer
0 – 99,999,999 gallons
Flow Meters
Multi-Jet, Paddlewheel, Turbine, or Custom type supplied by customer.
Outputs
8
Output Voltage
12 VDC for Anderson Pilot Valve Manifolds
5 VDC for solenoid pumps
Operating Temperature Range
33 – 105°F
