J+ Advanced Start-Up Guide
(Version J8A 3.4, 04/01/19 and later)
Page 1
This guide will lead you through the menus used to display and set system parameters.
If you have ordered your J+ Advanced controller as part of a system which includes a water meter, one or more
manifolds, or solenoid pumps, some of the parameters may already be properly set.
You can use the ▼ and ▲ keys to navigate the top level menus in normal or reverse order. After a 10 second
period with no key press the display will return to the base display. During this period you can move forward or
reverse through the menu sequence. Pressing the
Cancel
/
Exit
key will return to the base display immediately.
Any top level menu item with '
Q
' characters at the margins allows operator to press
Enter
to enter or change a
value or perform the currently displayed function. Pressing
Cancel
/
Exit
will exit the screen will return to the base
display.
All numeric entries are right justified as they are entered. Decimal places are fixed, and when entering values
with decimal positions, trailing zeros must be entered
.
Numeric values are for illustrative purposes only
Base (default) display and top level menu rotation
The Base Display shows the
instantaneous flow,
maximum flow for full
capacity chemical feed, and
the resettable totalizer.
Additional information and
warning messages may be
displayed on line 4. See
Warning, Error, &
Information Messages
(Display Line 4)
, Page 4
There are both a resettable and
a non-resettable totalizer.
Pressing
Enter
twice will
clear the resettable totalizer.
See
Turning Individual
Manifold Feed On & Off,
Page 2
See
Setting The VPS
(Flow Volume per
Stroke),
Page 2
See
TOTALIZERS
, left
column.
See
Priming a Pumper
(Pumphead) or
Solenoid Pump,
Page 2
See
System
Configuration Sub-
menu
, Page 3
You should have the
software version
number
, and
release
date
handy when calling
the factory for assistance
See
Turning Global
Chemical Feed On & Off,
Page 2
