GYS PROTIG 201 DC FV, Перевод оригинальной инструкции

Страница: 25 / 116

EN
25
Operating manual
PROTIG 201 DC FV
Translation of the original
instructions
MMA STANDARD
This standard MMA welding mode is suitable for most applications. It allows welding with all types of coated electrodes, rutile, basic and on all mate-
rials: steel, stainless steel and cast iron.
MMA Standard
The grey areas are not useful for this mode.
Designation Setting Description & advice
Percentage of Hot Start 0 - 100 %
The Hot Start is an overcurrent during priming to prevent the wire from sticking to the part to be
welded. It is set in Intensity and Time.
Welding current 10 - 200 A
The welding current is adjusted according to the type of electrode chosen (refer to the electrode
packaging).
Arc Force -10 / +10
The Arc Force is an overcurrent delivered when the electrode or drop comes into contact with the
solder bath in order to avoid sticking.
Pulse MMA
This MMA Pulse welding mode is suitable for applications in the vertical up position (PF). The pulse mode keeps the weld pool cold and eases the
transfer of matter. Without the pulse mode, vertical-up welding requires a difficult «Christmas tree» shape triangular movement. With the MMA Pulsed
mode, this movement is no longer required and a simple straight up movement is enough (depending on the thickness of the workpiece). If you wish
to widen your weld pool, a simple lateral movement is enough (similar to standard welding). This process allows greater control during vertical-up
welding.
The pulse frequency is adjusted by pressing and releasing the «F(Hz)» button and then activating the main incremental encoder. Frequency value
increases when the incremental encoder is operated clockwise and decreases when it is operated anti-clockwise. Once the setting is set, it is possible
to press and release again the «F(Hz)» button to re-link the main incremental encoder to the current setting or to wait 2 seconds.
MMA PULSE
The grey areas are not useful for this mode.
Designation Setting Description & advice
Percentage of Hot Start 0 - 100 %
The Hot Start is an overcurrent during priming to prevent the wire from sticking to the part to be
welded. It is set in Intensity and Time.
Welding current 10 - 200 A
The welding current is adjusted according to the type of electrode chosen (refer to the electrode
packaging).