GYS PROTIG 201 DC FV, Перевод оригинальной инструкции

Страница: 23 / 116

EN
23
Operating manual
PROTIG 201 DC FV
Translation of the original
instructions
Cold current/Background
current)
Second welding current or «cold» current in standard 4TLOG or in PULSE
mode
PULSE frequency PULSATION frequency of the PULSE mode (Hz)
Down slope current.
Down slope current to minimum current, I Stop (S) to prevent weld defects
and craters.
Post-gas
Duration for which gas is released after the arc has stopped. It protects the
weld pool and the electrode against oxidization when the metal is cooling (S).
HotStart Adjustable overcurrent at the beginning of the welding (%)
ArcForce
Overcurrent delivered to avoid sticking when the electrode enters the welding
pool
TIG PULSE Pulse mode
TIG SPOT Spot mode:
MMA PULSE MMA process in PULSE mode
2T 2 time torch mode
4T 4 time torch mode
4T LOG 4 time LOG torch mode
Ampere (unit) Amperes unit for welding current settings
Volt (unit) Volt unit for displaying welding voltage
Second or Hertz (units) Seconds or Hertz unit for time or frequency settings
Percentage (unit) Percentages unit for proportionate settings
Display switch A or V Switches the display of voltage or current during and after welding
Program menu access Access to configuration menu (SAVE, JOB, ...)
Risk-reducing device Standard picture symbol indicating the status of the VRD function
Sleep mode Sleep mode
HMI OPERATION AND DESCRIPTION OF ITS BUTTONS
Sleep Mode / Sleep Exit
This key is used to activate or exit the standby mode. Activation of the mode is not possible when the product is in welding
condition.
Note: When the power is turned on, the product starts in standby mode.
Welding process selection button
This button is used to select the welding process. Each successive press/release switches between the following welding
processes: TIG HF / TIG LIFT / MMA. The LED indicates the selected process.