GYS GYSPOT INVERTER BP.CX, Руководство пользователя

Страница: 6 / 29

6/29
4- PRODUCT OPERATION
Key definition
Key
- Pressing this key allows to select the tool that will be
used : either clamp or single sided gun. For the BP.LCX
machine, pressing this key changes the mode from C clamp
to C clamp adjustment, X clamp, X clamp adjustment, and
finally single sided gun. The clamp adjustment mode allows
to close the clamp and apply the programmed force on the
electrodes with any current flowing. This mode is used to
adjust the arms.
- Pressing this key 2 seconds allows to come back to
normal mode from the other modes.
- Pressing this key 2 seconds brings the spot counter to
zero, when it is displayed.
- Pressing briefly twice this key erases the report that is
displayed on the screen, when in the visualisation mode.
- Pressing briefly this key when in program saving mode
erases the selected program.
Steel sheet thickness
This setting allows to select the thickness of the steel sheets
to weld. The sheet thickness can be adjusted using the +
and – keys (in the circle, position 5). The thickness can be
selected amongst the following preset values : 0.6, 0.8, 1.0,
1.2, 1.5, 1.8, 2.0, 2.5, 3.0 mm.
Type of steel sheet
This setting allows to select the type of steel sheet to weld,
amongst 4 families : coated steel, HTS steel, UHTS steel,
BORON steel. This setting can be adjusted using the + and
– keys (in the circle, position 5).
Arm used
When a clamp is used (either C or X), the user should
specify here the length of the arms fitted on the clamp, so
that the machine will adjust automatically the air pressure
to get the requested electrode force.
Use of the advanced modes
The MODE key allows to navigate through 3 different
modes : STANDARD MODE, MULTISHEET MODE, MANUAL
MODE. A long press on the MODE key allows to enter the
configuration mode, where the language and date can be
edited and the sound alarm activated for “current too low”
or “low pressure” messages. The up and down keys (in the
circle) allow to select the parameter to modify (sheet
thickness, type of steel, arm used). The + and – keys allow
to modify the parameter.
Save a report
More details can be found on this function in the
corresponding chapter.
The « record » key allows to enable or disable the
saving of a report.
The « visualise » key allows to read the sequence of
spots performed.
Saving of user welding parameters
The « save » key allows to save user welding
parameters (mode, sheet thickness, welding current,
welding time or electrode force)
The “open” key allows to call back previously
saved welding settings. The machine automatically goes to
manual mode, recalling the saved parameters (current,
welding time, force) and the tool used (clamp or gun).