GYS GYSPOT INVERTER BP.CX, Руководство пользователя

Страница: 26 / 29

26/29
Use of C2 and C8 Arm
This arm requires the change of the short spindle. To do this, follow the process entitled “Changing of the arms of C-clamp”
but using a flat key to unscrew the short spindle off and substitute it by the long one.
Replace the short spindle by the long one
-
Take a recipient with a capacity of 100mL to collect the cooling liquid
-
Unscrew the short spindle off and take it off without forgetting the injector
-
Collect the cooling liquid (which is in the clamp axis)
-
Move the long injector to center it in the clamp axis (WARNING: bevelled side outside), then put it inside
manually (1).
-
Place the short spindle and screw it on the clamp axis (couple 15Nm) (2).
1
2
Type of spindles :
Short spindle : C1, C3, C4, C5
Long spindle : C2, C8
Short spindle
Long spindle
Long injector
Short injector