GYS EXAGON 400 CC/CV, Руководство пользователя

Страница: 23 / 82

23
EXAGON 400 CC/CV
EN
1s 1s 1s
...
...
...
...
...
Back to Setup
menu
Hot Start
Hot Start
time
AntiSticking
Frequency
(MMA vertical up)
Perrcentage
(MMA vertical up)
Validate current
setting
Reset current
setting
Current
value
Current
value
Current
value
Current
value
Current
value
TROUBLESHOOTING
This device integrates a default management system. In the event of a default, error messages may be displayed.
Error code Signification CAUSES SOLUTIONS
Thermal protection
Duty cycle excessed.
Ambient temprature above 40°C.
Obstructed air input.
Wait for the indicator to turn off before resuming
welding operations.
Oserve the duty cycle and insure a good ventilation.
Using the optional anti dust filter will reduce the duty
cycle.
+
Mains voltage default.
Mains power is out of range or one phase
is missing.
Have your electrical installation checked by a quali -
fied person. The voltage between the phases must be
between 340V RMS and 460V RMS.
+
Current sensor default The current sensor is inactive or faulty.
Have the sensor's connection cables checked by a
qualified person.
+
Power relay command
default.
The power relay could not be closed.
Have the relay's command connection cables checked
by a qualified person.
+
à
No temperature informa-
tion.
The temperature sensor is off.
Have the sensors' connection cables checked by a
qualified person.
+
ou
Fan default.
One of the fans is not rotating at the right
speed.
Check that there is no foreign object obstructing the
fan, check the cabling , replace the fan.
All operations requiring the removal of the machine’s cover and checking the electrical systems must be done by a qualified technician.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported