GW Instek PEL-2000B Series, Руководство пользователя

Страница: 87 / 317

OPERATING DESCRIPTION
87
The step resolution parameters apply to the
following:
CCH Step – CC high range
CCL Step – CC low range
CRH Step – CR high range
CRL Step – CR low range
CVH Step – CV high range
CVL Step – CV low range
CPH Step - CP high range
CPL Step - CP low range
Step Resolution
Range
The step resolution range is dependent on the load
module and the range:
Max resolution: Module dependent, see page
188
Min resolution: Module dependent, see page
188
Short Key
When short mode is on, the load unit can simulate
a short circuit.
Shorting can be individually set for each channel
when programming sequences.
To initiate a short circuit manually, the short key is
used. It can be used at any time during an
operation. It will not affect the settings. After a
short circuit has finished, the load unit will resume
the previous operation.
The short function can be set ON or OFF. When
setting to ON, the short key is enabled. When
setting to OFF, the short key is disabled.
The short key can be set to toggle or hold. When
pressed in toggle mode, shorts are toggled on and
off. When pressed in hold mode, the key needs to
be held to short the load.
The Short Safety can be used to set the short
operation mode. When setting to ON, the short