GW Instek PEL-2000B Series, Руководство пользователя

Страница: 140 / 317

PEL-2000B Series User Manual
140
2. Press the Selector knob to edit the
selected value, then turn to
increase or decrease the value*.
OR
Use the number pad to enter a
number.
9
P9
6
P6
P3
CLEAR
LOCK
3
8
P8
5
P5
P2
CAL.
2
7
P7
4
P4
P1
0
P0
1
A Value V 10.00
3. Press the selector knob or Enter to
confirm selection.
ENTER
or
4. Repeat steps 1-3 for the remaining parameters.
Note
The last Value (A Value or B Value) that is set
becomes the active setting. To swap between A Value
and B Value, use the A/B keys on the local load
module.
When setting the current limit, please ensure that the
current limit is within the test device’s limits.
A/B Value can be set for both High and Low Range.
*Press Shift to toggle between coarse and fine
adjustment when editing the A Value and B Value
parameters. See page 188 for details.
Select CV Range
Background
Constant Voltage mode can run in high and low
range. Range is dependent on the load module.
Ensure the menu is in CV Mode. See page 144.
Configure Configure
Mode
CP
Range
Low
Panel Operation
1. Press the F2 (Range) key repeatedly
until High or Low range is selected.
F1 F5
~
F2