MDO-2000E series User Manual
138
Example:
Parallel Bus Event
table
Time of event
Event data
Event Tables Format
Each bus type (UART, I
2
C, SPI, CAN and LIN) can have an event
table saved containing each bus event as a .CSV file. An event is
defined as a packet/frame/word or associated set of data being
successfully read according to the specific operating conditions of
each bus (Start of frame, acknowledgements, checksums, etc …).
The data associated with each event and the time of each event is
recorded.
File Type
Each event table is saved as
Event_TableXXXX.CSV into the designated file
path. Each event table is numbered sequentially
from 0000 to 9999. For example the first event table
will be saved as Event_Table0000.CSV, the second
as Event_Table0001.CSV, and so on.
Event Table Data
Each event table saves a timestamp of each event
relative to the trigger as well as the data in each
frame/packet at the time of an event. The
frame/packet data is saved in HEX format.
The table below lists in order the data saved for
each event table.
UART
Time, Tx frame data, Rx frame data,
Errors.
All manuals and user guides at all-guides.com