MDO-2000E series User Manual
132
3.
Press the
Bus
soft-key and select
Parallel from the side menu.
4.
Press
Define Inputs
from the bottom
menu.
5.
Press
Number of Bits
from the side
menu and select the number of bits
for the data bus.
By default the bus will assign bit 0
to D0, bit 1 to D1, and so on up to
the last bit.
6.
You may also assign a bit as a
clock. This bit will be one of the
bits in the bus. To add a clock bit,
press
Clock Edge
and select type of
clock edge. Selecting
Off
will
disable the clock bit.
7.
If you wish to define which channels are
assigned to the bus, press
Select Signal
from the
side menu and select the bit that you wish to
assign.
Channel 1 is
currently
assigned to bit 1.
8.
Next, press
Select Ch
and select
which channel is assigned to the
bit selected above.
All manuals and user guides at all-guides.com