GVI Security AR-6040, Руководство пользователя

Страница: 36 / 38

36
GVI Security
Appendix A: Remote Controller
The operational function keys on the remote control are listed as below figure:
The keys of the remote control function are the same as the keys of the front panel of the DVR. The only
difference between the remote control and the front panel keys is the “DVR SEL” key. Use the DVR Selection
key to switch control between each DVR. Use the remote control to control up to 16 DVRs. To setup the
remote control, assign a unique DVR ID to each DVR.
Use the front panel of the DVR to enter the OSD setup menu, and follow this path to change the DVR ID:
“Device”  “RS-485 SETTING”  “DEVICE ID”. Change the DVR ID to any number between 224 and 239,
and exit the menu. See the ID Table below for reference.
DVR ID 224 225 226 227 228 229 230 231
Remote Control # 1 2 3 4 5 6 7 8
DVR ID 232 233 234 235 236 237 238 239
Remote Control # 9 10 11 12 13 14 15 16
After changing the DVR ID, setup the “DVR SEL” of the remote control. Press “DVR SEL”, and then press the
Remote Control # immediately to select the DVR. For example, assuming the DVR ID is set to 225, press
“DVR SEL” and then press “2” immediately. Now, the remote control is only able to control the specified
DVR. Press “DVR SEL” and press the Remote control # to switch between DVRs. To exit the single DVR
Control mode, press “DVR SEL”, and press “Exit”.