GVD M1184, Быстрый старт

Страница: 12 / 54

Mobile NVRs M1184 / M1284 Quick Start Guide 6
Take a Tour
Title Description
On/off Control
and Status
Output
Connector for an additional on/off switch and additional status LEDs to the mobile NVR, which will be
very helpful when the mobile NVR is installed inside a cabinet.
Pin definition:
Pin Definition Description
1
2
9
10
1
Ctrl+
[Input]
Remote on/off control.
Should be connected to an external switch to turn
on/off the system (polarity is negligible).
2 Ctrl-
3 Power+ [Output] Status LED for system power.
Lights when the system is turned on. Off when the
system is turned off.
4 Power-
5 HDD+ [Output] Status LED for hard disk drive activity.
Blinks when the SATA disk drive is being
accessed.
6 HDD-
7 IGN+ [Output] Status LED for ignition signal.
Lights when ignition signals are received.
8
IGN-
9 WDT+ [Output] Status LED for watchdog timer.
Blinks when the watchdog timer is started.
10 WDT-
* Make sure the polarity is correct when connecting the external status LED to the status LED outputs.
USB 3.0 ports
Two USB 3.0 ports with xHCI (eXtensible Host Control Interface) by default that support the devices of
USB 3.0, USB 2.0, USB 1.1 and USB 1.0.
Legacy USB is supported so USB keyboard/mouse are able to work in DOS.
Install USB 3.0 driver to be able to use USB 3.0 in Windows 7.
* Intel ® USB 3.0 driver doesn't support Windows XP. All USB 3.0 ports will work as USB 2.0 ports in Windows XP.
DVI-D &
DVI-I video
connectors
Connectors for external montiors with DVI interface.
Support up to 1920 x 1200 resolution.
Support HDMI if an DVI-to-HDMI cable is provided.
USB 2.0 ports
Two USB 2.0 ports with EHCI (Enhanced Host Control Interface) by default that support the devices of
USB 2.0, USB 1.1 and USB 1.0.
Legacy USB is supported, which means USB keyboard/mouse still work in DOS.