GVD M1184, Быстрый старт

Страница: 44 / 54

Mobile NVRs M1184 / M1284 Quick Start Guide 38
Configure Network Parameters
If you have set up the NVR system by the Installation Wizard as described in Use Initialization Wizard ,
you can skip this section. Otherwise follow the guide below to set up the networking parameters:
Note Before conducting the network configuration, make sure the network environment is ready. If the network is
not available, contact your network administrator for further help.
1. On Windows®, click the Start button |
Control Panel | Network and Sharing
Center | Change adapter settings .
2. Right-click over the active connection to
use and click Properties from the context
menu that opens.
3. Click Internet Protocol Version 4 (TCP/
IPv4) . Then click the Properties button.
4. On the General tabbed page, configure the IP
address and the subnet mask. Then press the
OK button.