GVD M1184, Быстрый старт

Страница: 23 / 54

Mobile NVRs M1184 / M1284 Quick Start Guide
17
Install a 3G or 4G plus GPS Module (Optional)
7. Remove two plastic plugs from the rear
panel to open two holes for the 3G or 4G and
GPS antennas. Keep the plastic plugs for
necessary restoration in the future.
* Here
demonstrated
with M1284
only.
Open two holes for the 3G
or 4G and GPS antenna.
Note See the recommended antenna wire layout
as illustrated below. It is recommended that
the 3G or 4G and GPS antennas be pulled
through the antenna holes at the rear
panel.
WiFi
WiFi
3G/
4G+
GPS
GPS3G/4G
3G/4G plus GPS antennas to be
pulled through the antenna holes
at the rear panel.
8. Pull the other end of an antenna wire, a SMA
connector jack, through one antenna hole.
Be sure to meet the flat side of the SMA jack
with the flat side of the antenna hole so the
connector jack won't get stuck.
Arrange the flat side of the
SMA connector to meet the
flat side of the antenna hole.
9. Mount a round washer on the SMA connector
jack from outside the chassis, and secure an
nut to it.
washer
nut
Mount first
the washer
and then
the nut.