GVD M1184, Быстрый старт

Страница: 22 / 54

Mobile NVRs M1184 / M1284 Quick Start Guide 16
Install a 3G or 4G plus GPS Module (Optional)
The mobile NVR comes with two PCI Express Mini Card sockets to carry a wireless module for data
connection or as GPS receiver. Follow the guide below to install the optional 3G or 4G plus GPS module:
1. Open the mobile NVR and access the motherboard as described
in Access Motherboard on page 11 .
The top side of the motherboard then comes to view.
2. Find the two PCIe Mini Card sockets on the motherboard. Note
the 3G or 4G plus GPS module should be installed at the socket
that goes with a SIM card holder.
The connector has a break
among the contact pins.
Connector
’s
break
Mini-Card socket
socket for a WiFi module or
some other wireless module
socket for a
3G or 4G plus
GPS module
3. Have the 3G or 4G plus GPS module from
the accessories. Connect the module to the
connector by a slanted angle. Note to meet
the notch on the module with the break on
the connector.
4. Press down and fix
the module in place by
fastening two screws.
Press
5. Have the 3G or 4G
antenna wire. Connect the
antenna wire to the
“MAIN” connector on the
module.
6. And connect the GPS
antenna wire to the “GPS”
connector on the module.