GUIDANCE MARINE RadaScan View, Руководство по установке

Страница: 66 / 69

66
Network Connection Tests
Check Requirement
9
Sensor –Dashboard
Connection The network connection between the sensor and the Dashboard is OK.
Sensor –DP
Connection The RadaScan system’s DP system can receive a message string from the
sensor.
Functional Tests
Check Requirement
9
System is
Operational
1 or 2 responders can be identified by the sensor.
Responder codes are identified correctly by the system.
The Signal to Noise ratio is no less than
16dB.
Bearing Offset Place a responder at the stern, in-line with and facing the sensor. Check the
responder’s bearing on the RadaScan Dashboard display to verify any bearing
offset.
Range Test The system is able to locate a responder at a distance no less than
150
metres.
The responder’s code is identified correctly by the system.
The Signal to Noise ratio is no less than
16dB.
DP System Test The RadaScan system’s DP feed message is accepted by the DP system.
The DP weighting against other available reference systems is within acceptable
levels.
System Interference Tests
Check Requirement
9
Vessel Radio Whilst RadaScan system is tracking a responder, switch on the vessel’s radio systems.
Ensure that RadaScan system dœs not suffer any loss of signal quality.
Ensure that the vessel’s radio systems are not adversely affected by the Radascan system.
Vessel
Radar
(X-Band and
S-Band) Whilst the RadaScan system is tracking a responder, switch on the vessel’s X-band and
S-band radar and Artemis systems.
Ensure that the RadaScan system dœs not suffer any loss of signal quality.
Ensure that the vessel’s radar systems are not adversely affected by the Radascan system.
Training
Check Requirement
9
Basic Operation The crew understand the basic operation of the system.
The crew understand the need to switch on the system early.
The crew understand the importance of the correct positioning of responders.
The crew understand the need to suspend the system after use.
The crew understand the need to power cycle the entire system (Type
2
Marine
Processor and sensor) regularly (at least once a month).
Operator’s Guide The crew know how to access the Operator’s Guide.
Sensor Settings
Check Requirement
9
Note of Sensor
Settings The following information has been recorded from the Dashboard
(More>>Page 2 >> Sensor Settings).
Sensor type:
Transceiver Type:
Antenna Type:
Range P
1:
Range P 2:
Installation Checklist (Continued)
X-Band radar