GUIDANCE MARINE CyScan Скачать руководство пользователя страница 53

Страница: 53 / 62

Upgrading the Sensor Software Directly

If it is not possible to use the Remote Installer you can upgrade the sensor software directly
using a USB upgrade key.

USB0

Sensor

Information

Display

To Upgrade the Sensor Software Directly:

Before you begin the upgrade process you will need to ensure all of the upgrade files are
saved into a subdirectory named ‘

upgrade

’ in the root directory of a USB upgrade key.

1.  Insert the upgrade key into USB0.
2.  Power cycle the sensor.
3.  The upgrade will then begin and the system will transfer all the required files to the

sensor. The Sensor Information Display will output progress messages and any error
messages that may be applicable.

4. When the upgrade is complete the Sensor Information Display will prompt you to

remove the USB key and power cycle the sensor.

5. After the sensor restarts it will go into normal running mode.

Note: The USB upgrade key should be formatted to a FAT or FAT32 file system.
You cannot use a USB upgrade key that is formatted to NTFS.

Содержание CyScan































































Результаты поиска

Содержание CyScan

Отзывы:

Похожие инструкции для CyScan

Бренды по названию

Популярные бренды

GUIDANCE MARINE CyScan, Руководство по установке

Результаты поиска

Содержание CyScan

Отзывы:

Похожие инструкции для CyScan

Бренды по названию

Популярные бренды