Additional Information
29
FCC Warning Statement
This device complies with Part 15 of the FCC (USA Federal Communications Commission) rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating instructions for
satisfying RF exposure compliance. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Changes or modifications not expressly approved by the party responsible.
Access Point Configuration
Any wireless access point should be configured as follows:
1. The base address of the access point should be on the same subnet as the fixed IP address of the RangeGuard system.
Example: RangeGuard controller default address
192.168.2.231;
access point base address
192.168.2.111
.
2. The wireless configuration of the access point should be via DHCP set to assign addresses of
192.168.2.232
onwards to ensure that any device that
connects to the RangeGuard wireless network will not be given the RangeGuard controller address.
Содержание 20-0183-1
Страница 1: ... 1 ...
