Gudsen MOZA Pro, Руководство пользователя, Страница: 31 / 44

Use Software to Adjust Parameters
Follow the steps below to enter the parameter adjustment mode.
Turn off motor: Tick this box to shut down the motor
’s power. It's required to check this
box before calibrating the sensor. Otherwise, data errors in the calibration may occur.
Adjust the motor
’s working state and not make any noise. Check this box when audio is
required.
Sensor Calibration: Calibrate the gyroscope sensor.
Power: The output value of each motor. When the loaded camera is relatively light but the
torque is high, the gimbal may shake or generates noise. When the loaded camera is relatively
heavy but torque is low, the gimbal may fail to remain balanced or the thumb controller may
fail to properly control the gimbal movement. Lower the motor power to eliminate serious
shakes after the gimbal is turned on.
Rotation range
： Use the software to control the maximum rotation angle. This is not
recommended for regular use.