Gudsen MOZA Pro, Руководство пользователя, Страница: 16 / 44

To check MOZA ’s function before your first use, follow the steps below:
1. Long press the battery ’s ON/OFF button to turn on MOZA. This will check if the machine
is stable and noiseless.
2.
Long press the thumb controller’s ON/OFF button to turn on the controller. Check its
effectiveness. Move the joystick in all directions to see whether it can operate MOZA
successfully and noiselessly.
3. Take the handle from the stand and move it in the roll, pan, and tilt
axis directions. Check the camera
’s stability during this process.
4. Switch to the following different modes: underslung, upright, and briefcase. Repeat step
three for each mode.
5. Put the handle back on the stand and turn on the camera. After it is on, quick press the ON-
OFF button on the thumb controller to see if the camera will start to record. Roll the roller to
observe if it changes the c
amera’s focus. Press the ON/OFF button on the thumb controller
while the camera is recording to see if the camera turns off ．
6. After completing the steps above, you should be able to begin shooting.
Getting Started
Some things to remember before you get started:
1. Heavy lenses may be necessary in certain cases, but heavy lenses change the camera ’
s center of gravity, causing oscillation. Use the lens support in these situations. Remove the
lens support from the tool bag and install it on the pan axis quick release.
2. Follow Focus may also be needed on certain occasions. For your convenience, two tubes
for use in installing Follow Focus have been supplied. Remove them from the tool bag and
rotate the connecting base of the mount plate.
3. In some situations, you may need to use a very light camera or lens for shooting. Since
the roll axis power motor is quite heavy, this may cause the horizontal gravity to be uneven. In
such cases, advanced roll adjustment is necessary. Loosen the 4 screws on the U-shaped
handle. Contact official customer support, if necessary.
4. After installation and balancing, turn on the battery to make MOZA work. The left button
on the battery works as follows:
A quick press in the shutdown state displays the battery level, while a long press in the
shutdown state turns on the machine.
A long press when the battery level is displayed forces a reboot, while a quick press in the
power-on state causes shutdown.