Gudsen MOZA Pro, Руководство пользователя, Страница: 10 / 44

2. Install the tuning stand
The stand is composed of an upper rod holder, lower rod holder, and 5 round rods.
The upper rod holder comes with a groove and locking screw on the side.
Insert the two shorter rods without grooves into the lower rod holder to assemble the stand
base.
Insert the sleeve-free end of the longer rod into the lower rod holder, and the other end into the
upper rod holder.
Insert the two shorter rods with grooves into the upper rod holder and make sure the groove is
upwards. This will make it convenient to hold the MOZA Pro.
Tighten all knobs and screws to finish installation of the tuning stand.
Upper Rod Holder Lower Rod Holder
3. Install the handle bar onto the gimbal
Place the handle bar onto the stand. Attach the side handle to the handle bar and lock it in
your preferred position. Then, slide it horizontally into the gimbal and tighten the locking-knob.
Holding the gimbal by the side handle, make sure the gimbal is not loose.