Gudsen MOZA Pro, Руководство пользователя, Страница: 19 / 44

Gimbal Movement Control
The gimbal's movement can be controlled by the thumb or SBUS controller. The thumb controller works
effectively within 30 meters of the gimbal. It can control the pan and tilt axis movements in all Follow
and Operation Modes. The gimbal will stop and hold the last position. The last position will then
become the new stable position, and MOZA will balance according to it. The control effect won't
be interrupted by your movement or a F
ollow effect. You can control the gimbal’s
movement by the thumb controller or through your own actions.
Opposite cable connections may lead to an inability to control the gimbal with the wireless thumb
controller. Errors in VCC will cause electrical circuit fault. Please make sure the correct cables are
connected before the power is turn on.
P
P
M
GND
VCC
DAT