4G, 8G Digital Direct Security
19 |
P a g e
Output Continued…
Sequence
The sequence tab will allow you to set your DVR's cameras to display in sequence. i.e. each
camera will take turns in displaying for a programmed amount of time at full screen or a set
number of channels (4 and 8 way division sequencing is only available on DVRs with more than
4 channels.)
Note: In order for the sequencing to be
activated the user must log out and the
DVR needs to be in "locked" status.
•
Sequence cycle(s)
: In this box you
will determine how many seconds the
cameras will stay full screen before
changing to the next one.
•
Division mode
: Set the number of
channels to be displayed per
sequence page to 1, 4, 8 channels. (4 and 8 channel division sequencing not available on
4GL or 4G.)
•
Sequence channel no.
: This drop down box will allow you to set how many channels are
involved in the sequencing.
•
The final row of numbered drop down boxes will allow you to change the order in which the
sequence will display the channels.
