Guangzhou Liwei Beam 200W SHARPY 5R, Руководство пользователя

Страница: 4 / 12

Guangzhou Best Stage Light Equipment Co.’ Ltd
4
Display
Power Save NO
Free 30 seconds after closing backlight
OFF
Backlight ever bright
Burn on start
up OFF
Power on directly after reset, no light bulb (need to use the menu
or control table to manual light bubble)
NO
After power on automatic light bubble, must wait for the light bulb
light up success can be reset
Load Default
Press ok key see the confirmation dialog box, again press ok key,
Press OK key into edit
2.3. Information interface
Option instruction
Total using time Cumulative using time (Accuracy to the minute)
The use of time Use of time since the boot (Accuracy to the minute)
System error logs If the red indicator shine ,that mean the lamps runs error . The details can
be entered sub-interface to view
After you finish view, you can press the "OK" key to make the error log empty. Pay attention:
Sometimes not the Hall or optical coupler installation problems, But the
motor cable is connected backwards
2.4. Manual control interface
T
his interface use to control present light, neither belong to the from the machine state (didn’t received
DMX signal), nor belong to Host state( send DMX signal).
option
instruction
Reset Press ok key see the confirmation dialog box, again press ok key, enter the
reset interface, all motor reset.
Color wheel 0-255 Press OK key into edit state, its selected hundred. Press up
or down,change channel value .Press again OK key,
selected ten editor. Press again OK key, select the edit.
Press it again to exit the edit state.
…… 0-255
the speed of gobo
wheel 0-255
Blub control ON
OFF
2.5 Advanced
interface
Password is “Up down up down “ . For the runner , password is “Left right left right”