Guangzhou Liwei Beam 200W SHARPY 5R, Руководство пользователя

Страница: 2 / 12

Guangzhou Best Stage Light Equipment Co.’ Ltd
2
A t first , thanks for purchase our pro lighting products.
This user maunal include how to safely for installations and use of the important informations.
Please carefully read the requirements of installation and operation .
At the same time, please return this user manual properly preserved, for a rainy day.
The light is very good, humanization and industrial design perfect combination, attractive
appearance, fluent.The lamp body of aluminum alloy and high temperature resistant engineering
plastics design, good heat dissipation effect. Transmission mechanism adopts electronic positioning
technology.Products completely accord with CE standard, adopts the international standard DMX512
signal control.Widely used in televisions, DISCO, dance halls, night clubs and other indoor places and
outdoor performances.
This product when in the factory are performance in good condition and completely packed. So users
should strictly comply with this specification statement warnings and instructions, any damage caused
by misuse is not our company guarantee.If ignore this manual operation to fault and problem ， It is not
our responsible for the dealer. This user manual such as technical subject to change without prior
notice.
Safety warning information
Before the frist time to use it, Please check whether the damage in transit, if happen damages in
transit, please do not use this lamp, and please asap contact distributors or manufacturers.
Please don't install the lamp in the ordinary combustible material on the surface.Lamp should be
installed in the well ventilated place, and the distance of the wall to keep it over 10 cm, at the same
time, please check the fan hole was clear.
Do not use lamp direct project in flammable objects, lamp and the radiation of the distance between
the objects please keep it over 12 m.
Do not use direct lamp project light source , to avoid damage the eyes.
Before installation, please make sure your use power supply voltage and marked voltage
Note:before any install,maintain and clean lamp, please confirm cut off the power supply.
1.Operation
touch wheel function
Up turn left option/edit
down turn right option/edit
OK / Enter press the wheel
Executive start / exit
return when return menu ,press the wheel return previous page
Set ”Modify address code” as an example, tell about the using of the touch.
1. Touch button “setting” in the main interface, and then into “setting” interface.
2. The 4 touch button in the right, are “up”, “ok”, “down”, “back”.
3. Press “up” or “down” button select “DMX address”.
4. Press “ok” button into editing state.
5. Press “up” button or “ down” button modification address code (using the new address immediately
and autosave)
6.Press “OK” button out of the editing state ( could omitted)
7. Press “back” button back to the main menu.
If using the wheel, process like bellow :
1. In the main interface , turn the wheel, select “setting” button.
2. Press the turn wheel and then loosen, into “setting” interface.
3.In the “setting” interface, select “DMX address”
4. Press the turn wheel and then loosen, into the editing state.
5. Turn the wheel, modification address code