Guangzhou Liwei Beam 200W SHARPY 5R, Руководство пользователя

Страница: 3 / 12

Guangzhou Best Stage Light Equipment Co.’ Ltd
3
6. After modification, press turn wheel and then loosen, out of the editing state.
7. Turn the wheel select “back”, press turn wheel and then loosen, back into the main interface.
2.
Interface description
2.1 Main Interface
Top right corner 3 button for language switching and screen rotation
Bottom row four button corresponding sub interface is introduced, it’s in the back.
With touch operating mode sub interface is introduced, if use wheel, corresponding relation
as
follows:
Press up : turn left
Press down : turn right
Press ok : press the wheel
Use wheel operation dialog box
If ok ,press the wheel.if cancel ,turn the wheel.
（
as above the display)
2.2 Set up the interface
Option instruction
Run Mode DMX Slave state:Accept control table or main engine
Automatic
Statistics : Automatic operation and send DMX signal for slave
Note:If the bulb is put out before , the light bulb will not be full
light. If you need to observe the lighting effects, please keep the
light on
，
and then into the automatic state
DMX
Address 1-512
Press OK key into edit state, its selected hundred. Press up or
down,change address code.Press again OK key, selected ten
editor. Press again OK key, select the edit. Press it again to exit
the edit state.
Channel
Mode 16
The 17 th to 20 th channels are invalid.
20
Control speed of the 17 th to 20 th channels
（
see the channel list
）
Invert
Pan/Tilt OFF
NO
Swap
Pan-Tilt OFF
NO
Change the channel of XY axis
（
include trimming
）
Encoder
Pan-Tilt NO
Use encoder correct position
OFF
Do not use encoder correct position
No DMX
Signal KEEP
According to the original state continues to run
CLEAR
The return of the motor, stop running