Guangzhou Liwei Beam 200W SHARPY 5R, Руководство пользователя

Страница: 12 / 12

Guangzhou Best Stage Light Equipment Co.’ Ltd
12
Three core canon plug DMX512 interface circuit
Maintenance
a. If the light’s lens damaged or broken, and should need change the new lens, if the bulb damaged
or have any deformation, make the light dim, it says that the bulb had run out of it’s life., should
change in time. There are 3 thermal protection device, using for cut off the lights power when it is
heating. If the thermal protection device set up, and then need to check whether the fan is normal.
b.
It need Periodically to clean the out and in optical lens and the reflector’s. Out put for the
optimization lighting effect, clean time need to see the lights operating frequency and the using of the
surrounding environment, using the soft cloth or general glass cleaning products to clean. Suggest
clean the external optical system every 20 day, at least clean the internal optical system every 60 days.
c. Please don’t to use the alcohol etc organic solvent clean the out shell, in case it is damaged.
Statement
A . When the products manufactured, They are good performance, complete packaging . All users
should comply with the warnings and instructions stated above . Any damage caused by misuse is not
within the scope of the company's warranty . Operation manual of neglect caused problems and the
fault is not in the dealer is responsible within the scope of Neglect operation manual due to problem
is out of dealer responsibility .
B. This handbook stated related matters explanation right belongs to our company .
C. This lamp use 3 core XLR plug(
（
plug seat
）
. If use 3 core XLR plugs
（
plug seat
）
, you must use
a conversion line
（
5 core to 3 core
）
, as shown:The conversion of three and five core plug (male and
female)