40
1
2
3
6
5
4
7
8
9
0
AUT
OM
ATI
C
GAT
E L
OC
K
®
ELE
CTR
ONI
C SE
CUR
ITY
LOC
K
ACCESSORIES
Solar Panel (FM123)
The Solar Panel is a 10 watt solar powered battery charger for use with the GTO/PRO® 2000,
GTO/PRO® 3000/3200, GTO/PRO® 4000/4200 gate operator systems. Particularly suited for
remote installations, each Solar Panel comes with tubular steel support, mounting clips, wire
connectors, and 8 ft. of low voltage wire (see Low Voltage Wire for additional wire). The GTO/
PRO® control boards have clearly labeled terminal connections for easy installation of the Solar
Panels. Installation in some regions of the world will require multiple solar panels for adequate charging
power.
Solar Panel (FM122)
is a 5 watt solar powered battery charger with all the same features as (FM123).
Push Button (doorbell) Control (RB101)
Unlit doorbell button for remote entry or exit control. Wires directly to the control board and uses 16
gauge multi-stranded, dual conductor low voltage wire (sold separately).
Pin Lock (RB975)
The Pin Lock substitutes for the clevis pin at the front end of the GTO/PRO® 4000/4200 gate
operator. Helps prevent theft of the operator from the gate, while allowing quick release of the
operator.
Key Chain Mini Transmitter (RB744)
The Key Chain Mini Transmitter is a miniature version of the GTO/PRO® 4000/4200 entry
transmitter and has the same adjustable code settings. 12 Volt battery included.
Entry Transmitter (RB741)
The GTO/PRO® entry transmitter, with adjustable code settings, is standard equipment with all
GTO/PRO® 4000/4200 systems. 9 Volt battery included.
Digital Keypad (F300)
The specially designed digital keypad can be easily installed as a wireless or wired keypad. It can be
programmed to use up to fifteen different personal identification number (PIN) codes. Each code is
face programmable with additional security features built in. Wired installations require 16 gauge,
low voltage, multi-stranded, dual conductor, direct burial wire (sold separately). Requires 3 AA
batteries (not included).
GTO/PRO Exit Wand (FM139)
The GTO/PRO® Exit Wand is designed for residential and agricultural applications and is
compatible with all GTO/PRO® automatic gate operator models. The wand is an electromagnetic
sensor, which offers 'hands free' operation of the GTO/PRO® 4000/4200 Gate Operators with a 12 ft.
radius of detection of vehicles in motion.
Automatic Gate Lock Pull-to-Open (FM144)
A MUST for added security. Solenoid driven, with a steel housing. Unlocks and locks automatically
as gates open and close. Used with the GTO/PRO® 4000/4200 system for maximum stability and
security. Comes with a keyed manual release. Recommended for gates over 8 ft. long. Ideal for
animal enclosures or high wind areas.
®
DC-SERIES
®
DC-SERIES
