24
GPX-SL25 Instruction Manual
rev 03.21.13
MAINTENANCE
Routine Maintenance:
• Test the operator, accessories, and safety devices monthly.
• Service the gate operator, accessories, and safety devices regularly.
Maintenance Checklist
• Test the safety edges to make sure the gate responds.
• Check the obstruction settings (both open and close modes) see page 15.
• Lubricate and adjust the chain when necessary.
• Check for wear on all moving parts, and tighten bolts as necessary.
• Check rollers on the gate and lubricate if needed.
• Check for loose or corroded wires.
• Make sure the warning signs, roller guards, fence screen, etc. (see page vii) are installed.
WARNING: ALWAYS TURN OPERATOR OFF AND DISCONNECT
AC POWER BEFORE ADJUSTING OR SERVICING IT!
Mount the operator housing after all installation
procedures are complete. Slide operator housing over
legs, align holes, and use screws provided to attach
housing to operator.
IMPORTANT: Hang the two (2) GTO Warning Signs
(provided) on both sides of the gate before operating.
Make sure all warning signs and labels are
in place.
ATTACHING THE HOUSING
