GTCO CalComp Super L VI Series, Руководство пользователя

Страница: 30 / 48

Super L VI 30
 Communication Options
 Output Format Options
 Mode Options
Communication Options
 Baud: The rate, in bits/second, at which characters are transmitted across the RS-232C
serial interface. Choices are: 1200, 2400, 4800, 9600, 19200 or 38400.
 Data Bits: Data bits represent the actual data being sent from one device to another.
Both devices must be set for the same number of data bits. Choices are: Seven (7) or
Eight (8).
 Stop Bits: Each character has one or two stop bits, which tell the receiving device that
a character is complete. The number of stop bits usually does not matter. Setting for
two stop bits instead of one may overcome a mismatch in parity or data bits. Choices
are: One (1) or Two (2).
 Parity: One bit can be allocated for parity (parity is a simple error-detecting scheme).
Both devices (sending and receiving) must be set for the same parity – either odd parity
or even parity – or they must be set for no parity. Choices are: None (N), Even (E) or
Odd (O).
Output Format Options
 GTCO: Selects GTCO-compatible formats. Choices are: Binary or ASCII.
 CalComp: Selects CalComp-compatible formats.Choices are: Binary, ASCII 1, ASCII 2,
ASCII 3 or ASCII 4.
 Summa: Selects Summagraphics-compatible formats. Choices are: Binary or ASCII.
ASCII formats can be modified by including or excluding a button code, decimal point, carriage
return or line feed, depending on whether GTCO, CalComp or Summa formats have been
selected.
 Button: Defines whether the Pushbutton (Pb) value is included in the ASCII output
report. This option is available only with GTCO formats. Choices are: Include or
Exclude.
 Space: Defines whether the Space (Sp) character (hex 20) is included in the ASCII
output report as a delimiter between the X and Y coordinate values. This option is
available only in GTCO formats. Choices are: Include or Exclude.