GTCO CalComp Super L VI Series, Руководство пользователя

Страница: 9 / 48

Super L VI 9
A TabletWorks icon will display in the System Tray on the Windows Task Bar. Right click
on the icon to display the TabletWorks Menu, which provides access to all the TabletWorks
features.
Hardware Configuration
When you use the USB interface, no hardware configuration is required. When the optional
serial interface is selected, Super L VI must be configured to send data in a format that is
compatible with the application software. Different applications have different requirements
when interacting with a digitizer. The Super L VI is designed to provide the appropriate serial
requirements for a wide variety of graphic, CAD and estimating applications using a simple code
system. The SuperSet Menu on the surface of the Super L VI is used to enter the appropriate
code for the software being used. A table in
the Using the SuperSet Menu
section of this
manual lists the SuperSet Codes for a wide variety of applications.
Determine if you have not already, which communication connection you will be using – USB or
the optional serial.
USB Connection
Super L VI USB port connection is USB 1.1 and 2.0 compatible. When the digitizer is connected
to the USB port, Windows will recognize that there is a new device connected. If Windows
displays the
Found New Hardware
prompt, follow the onscreen instructions to complete the
driver installation.
1. Connect the interface cable to the USB jack on the Super L VI Connector Panel. The
connector is keyed and will fit only the correct jack. Do not force it. Attach the other
end of the USB cable to any one of the USB ports
on your computer or USB hub.