GTCO CalComp Super L VI Series, Руководство пользователя

Страница: 7 / 48

Super L VI 7
Indicator Light
Active Area
The drawing area – the Active Area – is the portion of the tablet surface designated for
digitizing. Its boundaries are marked at each corner by a right-angle crop mark.
SuperSet Menu
The SuperSet Menu is the row of keys located across the top of the digitizer. It provides a
means of configuring your tablet so that it sends the appropriate information for a serial
connection to the software you’re using on your computer.
Indicator Light
The power/proximity LED in the upper right corner of the Super L VI frame is the Indicator
Light. It remains off when the power is on. However, when the transducer is in proximity
(within the range) of the Active Area, the LED is solid green.
Transducer
Two types of transducers can be used with the Super L VI: pens and cursors. Both are
available in corded and cordless versions. The corded transducers get their power from the
digitizer. Cordless transducers are powered by batteries. They will go into a battery-saving
Sleep Mode
when no button has been pressed for one to five minutes, depending on the type
of transducer being used. To reactivate a sleeping transducer, press one of its buttons.
Cursors
The cursor is similar in appearance to a mouse, except that it has an attached lens with
crosshairs for highly accurate detail work. Cursors are available in 4 or 16 button models.
Pens
Each pen is similar in appearance to a ballpoint pen. The pen transducer has three buttons,
two on the side of the barrel and one in the pen tip.
The pen tip is
Button 0 and is used as the
pick, or left mouse, button. The lower button is Button 1 and the upper is Button 2.
Preparing the Super L VI
Mounting on a Stand
Visit our Website gtcocalcomp.com to see our Recommended Tilt Stand (Versa Table)