GTCO CalComp Drawingboard IV, Руководство пользователя

Страница: 11 / 46

DrawingBoard IV 11
Overview of the Menu Strip
The Menu Strip is composed of:
Config/Exit Key
The Config/Exit key turns Configuration Mode ON and OFF.
3 Bank Keys
There are three Bank keys: A, B and C. Each bank has a different set of tablet options that
are available through Configuration key combinations.
18 Configuration Keys through
They keys numbered 1-18 can be used as both Configuration and Macro keys. When the
tablet is in Configuration Mode, the keys function as Configuration keys. These keys allow
you to set specific tablet options by turning different combinations of Configuration keys
ON or OFF.
When Configuration Mode is OFF, the keys function as Macro keys. Macros can be
recorded only with the TabletWorks software (see TabletWorks Help).
3 Save and 3 Restore Keys
The Save and Restore keys work hand-in-hand. They are used to save (or recall) a setup to
(or from) one of three save areas. There are three pre-programmed setups that come with
the tablet. You can use these setups directly or overwrite them with your own. The Default
Save key controls the first save area. The setup saved to this area is activated whenever
you power up the tablet. We recommend you save the setup you use most often as
Default.