GTCO CalComp Drawingboard IV, Руководство пользователя

Страница: 9 / 46

DrawingBoard IV 9
column (0, 4, 8 or C). The right column button must be held down while pressing the left
column button. This same procedure turns the illumination off. The illumination defaults
to off when the tablet is first powered on. Since you always need one right column button
and one left column button free to control the cursor illumination, you should reserve one
button in each column from any macro recording.
NOTE: The DrawingBoard IV high accuracy cursor resembles the pointer for the 9500 series
tablet. Although the only difference seems to be the presence of the row of LEDs above
the top row of buttons on the 9500 series cursors,
DO NOT interchange these cursors as
damage to both tablet and cursor may result.
Using the Pen
There are three variations of pens: the click
tip, the pressure tip and the lite touch tip.
The differences among these pens are tilt
and height-sensitivity. On all three pens, the
pen tip is Button 0 and is used as the pick,
or left mouse, button. The lower side
button is Button 1 and the upper side is
Button 2.
The functions these buttons provide are
defined through the TabletWorks software,
or through your own software application.
Click Tip Pen
The click tip pen is available in both corded and cordless versions. It is primarily used for
tracing and menu picking. To use the pen, press down until you feel the tip click.
Pressure Pen
The pressure pen is only available in the cordless version. With the pressure pen, the pen
tip can be used both as a mouse button and a pressure sensitive button. To take
advantage of the pressure feature, the software package you use must recognize pressure
sensitivity. The software assigns values to the pressure levels and uses this data to vary
such parameters as line width and color.