GTC Sound Innovations REVPAD, Руководство пользователя, Страница: 77 / 85

•
Select and Play
makes the MIDI patch selection immediately upon touching the desired segment and exits MIDI Program
Change.
4. Next assign a MIDI Program Change layout to a Touchpad Control Button. Press SYS and then navigate to the Control Button
assignment screen in system configuration. See Touchpad Control Button Assignment on page 52 for more information.
MIDI-OUT Control Change
Setting up the REVPAD MIDI-OUT Control Changes allows you to send up to six different CC values using the Touchpad to external
MIDI devices.
1. Connect a cable from the MIDI-OUT/Thru connector in the back
panel of the base unit to the MIDI-IN port of your MIDI device
and verify that the MIDI TX channel is set correctly, according
the requirements of your MIDI device.
See MIDI Control on
page 57 for more information.
2. Select a patch for which you want to add MIDI-OUT sittings. See
Modifying a Patch on page 27 for more information on this
procedure.
3. Press the right arrow button (
A
) eight times until you see the
third effects screen (
B
).
4. Press the right arrow button (
A
) twice more (
B
) to select MIDI .
5. Press the down arrow (
C
) to see the MIDI Channel page (
E
). Rotate the Navigation Roller (
E
) to appropriate MIDI channel (CH-1
through CH-16). For this example CH-1 has been selected.
6. Press the down arrow (
C
) to see
CC-1
, the first MIDI Control Change page (
F
). Rotate the Navigation Roller (
E
) to adjust values
according to the table below.
61
MIDI Control