GTC Sound Innovations REVPAD Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 85

GTC Sound Innovations REVPAD Скачать руководство пользователя страница 15

RF Exposure Warnings

Mobile Device RF Exposure Statement

Mobile Device definition:

a Mobile: (§2.1091) (b) — A mobile device is defined as a transmitting device designed to be used in other than fixed locations and to
generally be used in such a way that a separation distance of at least eight inches is normally maintained between the transmitter’s
radiating structure(s) and the body of the user or nearby persons. Per §2.1091d(d)(4) In some cases (for example, modular or desktop
transmitters), the potential conditions of use of a device may not allow easy classification of that device as either Mobile or Portable.
In these cases, applicants are responsible for determining minimum distances for compliance for the intended use and installation of
the device based on evaluation of either specific absorption rate (SAR), field strength, or power density, whichever is most
appropriate

RF Exposure

This device is only authorized for use in a mobile application. At least 8" of separation distance between the REVPAD and the user's
body must be maintained at all times.

ix

Welcome to the Creative World of the GTC Sound Innovations REVPAD

«
...
13
14
15
16
17
...
»

Содержание REVPAD






















































































Отзывы:

Нет отзывов